TUTTE LE ROSSEThe unofficial Ferrari compendium · all models for learning and reference DE

Ferrari 365 California

Ferrari 365 California (1966–1967)

Photo: MrWalkr · CC BY-SA 4.0

Production1966–1967
EngineV12
Power320 PS
⚖ Compare

The Ferrari 365 California replaced the 500 Superfast in 1966 and was intended as an open-top car in the spirit of the 250 GT Spyder. It inaugurated the 365 family: Its 4390 cm³ V12 was derived from the 4.0-liter Colombo of the 330, with the bore enlarged to 81 mm. The chassis came from the 500 Superfast, and Pininfarina supplied the cabriolet bodywork. Power steering and Borrani wire wheels were part of the standard equipment. Following its debut in Geneva, only 14 units were built, and production ended in 1967.

Summarized from the sources cited below; every figure in the text was automatically verified against the sources.

Good to know

  • The prototype was based on the chassis of a 330 GT 2+2 Type 571, the production cars on Type 598.
  • Of the 14 cars built, 2 were right-hand drive.
  • The German source calls the 365 California a "stepchild": It still had a live rear axle, but the 4.4-liter V12 of the other 365 models.
  • The chassis was first bodied and trimmed at Pininfarina's Grugliasco plant and then returned to Ferrari, where the mechanical components were installed.
Learn moreProduction · Classification

Production

The 365 California was the first model of the 365 series. The prototype was built on a chassis of the 330 GT 2+2 (Type 571); for production, the Type 598 chassis was used. It first went to the Pininfarina plant in Grugliasco, where the body and interior were fitted, and then returned to Maranello, where the mechanical components were assembled. The car was shown in 1966 at the Geneva Motor Show.

Classification

With power steering and Borrani wire wheels as standard equipment, the car was intended as a comfortable, open-top Ferrari in the tradition of the 250 GT Spyder. Nevertheless, the German source describes it as a stepchild: It carried over the chassis with a live rear axle and the wheelbase of its predecessor, but used the engine of the other 365 models. With only 14 units, it remained extremely rare; production ended in 1967.

Summarized from the cited sources; every figure was automatically verified against the sources.

Frequently asked questions about the Ferrari 365 California

When was the Ferrari 365 California built?

The Ferrari 365 California was built from 1966 to 1967.

How much power does the Ferrari 365 California have?

Power of the Ferrari 365 California: 320 PS.

What engine does the Ferrari 365 California have?

Engine of the Ferrari 365 California: 4390 cm³ Tipo 217B Colombo V12. It is mounted at the front.

Who designed the Ferrari 365 California?

Design of the Ferrari 365 California: Tom Tjaarda at Pininfarina.

Enjoying the site? How to support it.

From the same model family

Ferrari 340 America1950

Ferrari 340 America

1950–1952 · V12
Ferrari 342 America1952

Ferrari 342 America

1952 · V12
Ferrari 375 America1953

Ferrari 375 America

1953–1954 · V12
Ferrari 410 Superamerica1955

Ferrari 410 Superamerica

1955–1959 · V12
Ferrari 400 Superamerica1959

Ferrari 400 Superamerica

1959–1964 · V12 · ▶ Video